WALTHER REIGN M2 24″ – .22 CAL

WALTHER REIGN M2 24″ – .22 CAL

The Walther Reign M2 L combines the features of a full-size rifle with a compact, athletic body – a genuine bullpup. And as the name suggests, it lays claim to the throne in the air rifle world.

The second generation of the Walther Reign builds on the success of its predecessor. Trimmed for lightness right from the start, the Reign M2 retains the weight-optimized design of the original model. With a weight of fewer than three kilograms, it remains first and foremost one thing: featherweight. The stock is made of robust polymer, and the Picatinny rail is machined from high-strength aluminium. the Reign M2 L is a true featherweight, but when it comes to precision, it delivers heavyweight performance.

That’s because the Reign M2 L takes full advantage of its bullpup design. The magazine sits at the height of the cheekpiece, leaving room for a rifled barrel that takes up 600 mm of the total 765 mm length. The barrel, precision-manufactured by Lothar Walther, has very low vibration thanks to its robust design and has a 1/2″ UNF thread for a silencer. Power is supplied by a capacious 230-bar compressed air cylinder with an integrated pressure gauge and quick-fill adapter.

With its reversible, easy-to-use cocking lever, the Reign M2 L is perfect for fast, accurate shooting by left- and right-handers alike. The quick-detach sling mount allows the attachment of a carry strap on either side.

Features:

• Rotary 10 shot .22 magazine can be inserted from the left or right side.
• Tactical 22mm Weaver/Picatinny rail system for scopes,
• 500 MM riffled full metal barrel with thread end.
• Full metal flash hider, easily removed for Suppressor/Silencer installation.
• A side lever to enable fast cocking can also be installed on either side.
• PCP pressure fill gauge and fill prob entry point.
• Moulded front with a textured nonslip finish and under-rail system.
• Moulded stock with nonslip pistol grip and integrated recoil pad design.
• Adjustable trigger and integrated trigger guard with push-button safety.

Use:

• Make sure the barrels are cleaned before use the first time. Don’t use solvent. Mineral-based cleaners like balistol should be used.
• Don’t use a brush or anything abrasive on the barrels; just oil and cotton patches.
• Use silicon oil and grease for oiling and lubricating
• Never let the tank drop below 1000PSI unless it is being emptied for repair.
• If filling from a scuba tank, purge the air very slowly
• If filling from a hand pump takes breaks every 2 minutes to allow the air in the pump to cool, failure can make the seals in the gun, and the hand pump wear faster than needed
• Never exceed the max limit of the tank on the rifle if it is not written on the tank stay below 200BAR or 20MPA
• Most PCP air rifles will prefer heavier-weighted pallets

Specifications: