Timney Browning X-Bolt Trigger (1.5-4lbs)

Timney Browning X-Bolt Trigger 1.5-4lbs

Timney is the market leader for Browning replacement triggers. Fully adjustable for Sear Engagement (Creep), over travel (Follow through) and Pull Weight.

Features:

• Trigger allows you to become more accurate with your rifle
• No gunsmith needed, easy to install
• Adjustable for a custom feel

Compatibility:

• Browning X-Bolt
• X-Bolt Max Long Range
• X-Bolt Max Varmint/Target
• X-Bolt Hunter Long Range
• X-Bolt Hell’s Canyon Speed A-TACS AU Camo
• X-Bolt Hell’s Canyon Speed A-TACS TD-X Camo
• X-Bolt Hell’s Canyon Long Range
• X-Bolt Pro
• X-Bolt Pro
• X-Bolt Medallion
• X-Bolt Micro Midas
• X-Bolt Stalker

What Is Trigger Pull weight?

Pull weight is the amount of force, in ounces or pounds, required to fire the trigger. Or, in other words, how hard you have to squeeze the trigger to shoot your rifle. Timney Trigger experts at our Phoenix, Arizona plant hand-test every trigger in its intended action and then set the pull weight at our factory standard, 3 lbs.

If you prefer a different pull weight, you select it from the drop-down above, and your Timney Trigger will be customized to your preference.
Accuracy is the #1 reason to replace your factory trigger with a Timney. A lighter, crisper, more consistent trigger pull will make you more accurate with your firearm.

Below is a guide for pull weight selection:

2-2.5 pounds
Light trigger pull weights are great for people shooting lighter-weight rifles as they can help keep you on target during the shot. Also common weights for target shooting from a bench.

3-3.5 pounds
By far the most common trigger pull weight -this is great for virtually all applications, including target shooting, hunting and 3-gun competitions.

4.0 pounds+
Heavy trigger pull weights are good for cold weather hunting or applications where you may be shooting with gloves on.

Tips:

The Timney Browning X-Bolt Trigger is fully adjustable for Sear Engagement (Creep), over travel (Follow through) and pull weight.
The pull weight is adjusted by turning the pull weight screw with a 5/64 hex Wrench. The sear engagement and overtravel are adjusted using a .050 hex Wrench.

Sear Engagement:
Sear engagement controls the amount of movement the trigger has before it breaks. Sear engagement is a custom set at the Timney Factory and shouldn’t need adjustment. However, if you want to adjust your triggers sear engagement (Creep) the procedure is as follows:

With the rifle unloaded and cocked. Engage the safety. turn the sear engagement screw clockwise until it stops. Slowly turn it counterclockwise 1/8 of a turn or one flat of the .050 hex wrench. The safety should move freely, but the trigger should not move when the safety is engaged.

Overtravel:
Overtravel (Follow Through) is the distance the trigger moves after it fires. Timney Trigger Jedi’s adjust the overtravel to factory specifications, but overtravel is a matter of preference and can be increased or decreased to match your preference. The over-travel screw is on the front of the housing just above the pull-weight screw. With the trigger in the fired position and using a .050 hex wrench, turn the screw clockwise until it stops. Once the screw stops, turn the screw counterclockwise 1/8 of a turn or one flat of the hex wrench. Squeeze the trigger as you turn the screw to the desired amount of follow-through. BE CAREFUL; if the overtravel is set too tight, the trigger will not fire.

Pull Weight: 
Pull weight is controlled by the bottom screw on the front of the housing. Using a 5/64 hex wrench turn the screw clockwise to increase the pull weight or counterclockwise to decrease the pull weight. From the factory, the pull weight is set at 3 lbs.