Mesa Tactical Remington 870/1100/11-87 SureShell Aluminum Carrier – 6-Shell, 12-GA

Mesa Tactical Remington 870/1100/11-87 SureShell Aluminum Carrier – 6-Shell, 12-GA

Our SureShell shotshell carriers retain ammunition reliably and, being metal, can withstand the rigors of daily use and abuse. Fabricated from aircraft aluminum, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse.

SureShell carrier yokes are milled from 6061-T6 aircraft aluminum, then bead blasted and Mil-spec hard anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun’s finish. A unique arrangement of threaded fasteners secures the shell holder to the shotgun receiver without the risk of stripping threads in the aluminum bracket.

SureShell shotshell carriers are available in three configurations:, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.

The receiver mounting scheme of our receiver mount SureShell carriers for the Remington shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Note that SureShell shotshell carriers cannot be installed on the right side of Remington semi-auto shotguns.

To use a six- and eight-shot SureShell carrier mounted on the left side of the Remington 870 shotgun, you must use a tactical forend that does not overlap the receiver, or a factory forend that is cut down appropriately. SureFire® forends are fully compatible with our six-shot SureShell carriers, but will need about ½ inch shaved off the end to be installed with our eight-shot SureShell carriers. Remington side mount SureShell carriers are available in both 12 gauge and 20 gauge models.

Optional stock mount shell carriers attach to the sides of standard, the cheek riser of the Urbino Tactical stock, and the Benelli pistol grip fixed stock (does not fit Benelli M4 stock or Urbino Tactical stock).

Features:

• The best and most durable weapon mounted shotshell carrier available
• Innovative rubber friction retention system solidly holds shotshells in place.
• Machined from 6061-t6 aluminium.
• Hard coat anodized matte black.
• Mounts via brackets attached to shotgun or via drilled and tapped receiver holes.
• Mil-spec hard coat anodized for a rugged non-glare finish.
• Most sure shell aluminium shotshell carriers mount directly to a specified receiver.

Compatibility:

Factory shotgun forends, except “tactical” forends, often feature significant receiver overlap when the bolt is pulled back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with some SureShell shotshell carriers. Before you install a SureShell shotshell carrier, measure your forend’s receiver overlap and compare it to the furthest forward point of the shotshell carrier. Then cut any potential overlap or interference off the end of the forend with a miter saw or a rotary arm saw for a perfect fit.