FX IMPACT M3 EXP SNIPER .30 PCP

FX IMPACT M3 EXP SNIPER PCP – .30 cal

The FX Impact defines what a modern airgun can be. A rifle without limits. It is a once in a generation rifle. A rifle that advances and evolves to push the boundaries of what compressed air can achieve. The Impact M3 once again redefines this high standard with groundbreaking advancements, upgrades, and a sole unwavering focus on creating the most advanced, most accurate, and most capable airgun you’ll ever shoulder.

The improvement within the M3 starts with its dual regulators. The 1st regulator pre-reduces the air pressure in preparation for the 2nd regulator. This provides less stress on the 2nd regulator and achieves a more constant output pressure with fewer standard deviations.

The FX Impact is firmly seen as the greatest airgun made. The proof is undeniable. Shooters flock to the FX Impact, competition lines are dominated with the presence of this rifle, and shooters continue to expand what an air rifle can do with one rifle; the FX Impact. Why? It performs, it delivers, and it continues to provide the foundation for innovation. The FX Impact M3 advances the claim: the FX Impact M3 is the most advanced, most exciting and most accurate air rifle available.

The FX Power Plenum 720 is the new energy source of the Impact M3. This larger diameter plenum and its 72cc volume of compressed air provides both the precise amount of air and the power needed to propel the projectile. This new plenum works in coordination with the M3’s porting and valving to deliver the best power and efficiency available.

One of the most substantial upgrades to the Impact M3 is the user interface to the rifle: The Quick Tune System. This essentially tool-free system encompasses everything a shooter could use to fine-tune their rifle’s accuracy, allowing unlimited possibilities. Adjust the air pressure the rifle is using via the dual regulators, how long the valve stays open with the front valve adjuster, and now adjust the strength of the hammer with the completely redesigned micro and macro power adjustments. The Rear Macro Power Wheel is a 16-step power wheel that adjusts the strength of the hammer in increments of 5-15 FPS (depending on calibre and reg pressure). This works in conjunction with the Micro Fine Adjustment. This tunes the hammer strength in incredibly small increments of just 1-2 fps with each click of the barrel roller, all at your fingertips. The combination of these is unrivalled in the airgun world!

Other improvements are vast and include an ambidextrous short throw cocking lever with an enlarged handle, dual transfer ports on most calibres, tightened barrel housing tolerances to provide a tighter fit and better accuracy to the rifle, tightened breech tolerances to house the Side-Shot Magazine, an updated trigger that provides a crisp second stage break while also allowing the trigger post to move forward or back, 20 MOA built into the scope rail, Dual Wika manometers, and an abundance of forthcoming optional accessories

Features:

• Dual AMP Regulators – Externally Adjustable

• Quick Tune System (micro and macro adjustment of hammer-spring tension)

• Valve adjuster (valve-flow tuning)

• Interchangeable Caliber System

• Multiple Accessory rails (picatinny) sides and bottom

• Accessory spot to mount angled pressure gauge

Specifications:

Basic tips for PCP operation.

– Make sure the barrels are cleaned prior to use the first time. Don’t use solvent. Mineral-based cleaners like balistol should be used.

– Don’t use a brush or anything abrasive on the barrels just oil and cotton patches

– Use silicon oil and grease for oiling and lubricating

– Never let the tank drop below 1000PSI unless it is being emptied for repair.

– If filling from a scuba tank purge the air very slowly

– If filling from a hand pump take breaks every 2 minutes to allow the air in the pump to cool failure can make the seals in the gun and the hand pump wear faster than needed

– Never exceed the max limit of the tank on the rifle if it is not written on the tank stay below 200BAR or 20MPA

– Most PCP air rifles will prefer heavier-weighted pellets