CZ 457 Royal 20″.22LR

CZ 457 Royal 20″.22LR

Today, the prevailing way of operating long firearms is the so-called positive safety which also features on the CZ 457 guns in the form of a lever on the right-hand side of the receiver. The safety is released by moving the lever forward, exposing a red dot on the side of the receiver that indicates that the rifle is ready to fire. A new element in CZ rimfire rifles is the striker status indicator, which visually and by touch shows the status of the striker mechanism: when the striker is cocked, a small red indicator protrudes from the rear of the bolt. An additional benefit for safer handling is the separate bolt extractor control on the left side of the receiver. It is therefore not necessary to depress the trigger at all when stripping the gun for basic maintenance. Last but not least, once again in keeping with the current preferences of most shooters, the CZ 457 guns allow the bolt to be opened and extracted with the safety on.

Improved accuracy
In general, CZ rimfire rifles are highly accurate, however, the truth is that the design legacy of the CZ 452 ZKM limited the options to modify the trigger mechanism parameters. CZ has already managed to solve this problem in several variants of the CZ 455 family. As a result, the company has introduced a new trigger mechanism for the CZ 457 family. It allows the user to adjust the trigger pull weight within a very favourable range of 8 to 15 N, the trigger travel may be adjusted between 0.5-7 mm. Basically, the shooter has the option to use the gun for ordinary
training as well as a target special in its category. One element which is often overlooked but which plays an important role in accuracy is the weight of the striker. In comparison with previous models, the weight of CZ 457 rimfire rifle strikers has been reduced by more than 60%, resulting also in a faster strike and at the same time less shock when fired. Where stocks are concerned, there has been a great improvement in all long guns from CZ, which has also been reflected in the new rimfire rifles. For the CZ 457 series, CZ has developed a new type of bedding which allows
constant tightening of the screws in the barreled action within the stock. Improvements have also been made with ergonomics, this new series therefore has an extremely comfortable and reliable grip.

Improved user properties
In the past few years, CZ has considerably advanced its technologies, such as procedures for the surface treatment of metal parts. The company’s new products, including the new CZ 457 series, are thus treated with one the most durable anti-corrosion surface treatments on the market. In addition, users will undoubtedly appreciate the improved trigger travel, which has been achieved by redesigning the receiver and the bolt. Another advantage is the notably reduced turning angle of the bolt handle (30° less than previous CZ models). Thanks to this, the gun enables comfortable handling even with a riflescope as well as the ability to fit scopes with large ocular bells with lower ring heights. While focusing on this generational upgrade, CZ has also taken the opportunity to incorporate upgraded smaller parts, such as the trigger guard, magazine frame, rear part of the bolt, new Weaver rail interface, etc.

As has already been mentioned, the important benefits of the previous CZ rimfire rifle generation have been retained: the modular system allowing an easy replacement of barrels and changing of calibres, and compatibility of the barrels and magazines with the CZ 455 series.

Specifications: