Radian AFTERBURNER™ + RAMJET™ for GLOCK®17 Gen6

Description

Radian AFTERBURNER™ + RAMJET™ for GLOCK®17 Gen6

The Radian® AFTERBURNER™ + RAMJET™ combo provides unprecedented recoil reduction and match-grade accuracy in a concealed carry package. The threadless barrel design allows for effortless installation and removal for cleaning, while being legal for sale in all 50 states.*

The AFTERBURNER™ compensator is machined from hardened stainless steel, while the RAMJET™ barrel is machined from hardened 416R stainless steel. Both components are enhanced with a Radianite™ coating. This combination provides low friction, high hardness, and high corrosion resistance, making overall durability and erosion from muzzle blast a non-issue. Angled front faces on the AFTERBURNER™ also aid in holstering.

The INTRA-LOK® mounting system uses the taper-lock principle. A tapered locking screw interfaces with an angled V-groove on the underside of the barrel, perfectly timing the compensator as it locks onto the upper barrel profile at the muzzle end.

INTRA-LOK® allows the user to slide the compensator over the barrel, insert the locking screw, and tighten it for a simple and repeatable installation process. The system also allows the barrel to be easily removed from the slide for cleaning.

When installed on a Glock™ G17™, the AFTERBURNER™ + RAMJET™ combo increases the overall slide length by only .47″, allowing compatibility with all G34® holsters.

Features:

• Provides significant recoil reduction and match-grade accuracy.
• Threadless barrel design allows for easy installation, removal, and cleaning.
• AFTERBURNER™ compensator is machined from hardened stainless steel.
• RAMJET™ barrel is machined from hardened 416R stainless steel.
• Radianite™ coating provides low friction, high hardness, and high corrosion resistance.
• Angled front faces aid in smooth holstering.
• INTRA-LOK® taper-lock mounting system provides secure, repeatable installation.
• Compatible with all G34® holsters when installed on a Glock™ G17™.

What’s Included:

• 1 × RAMJET™ Ported Pistol Barrel
• 1 × AFTERBURNER™ Micro-Compensator
• 1 × INTRA-LOK® Tapered Screw
• 1 × TORX Bit

Specifications:

Installation Instructions:

1. Remove the magazine and visually inspect the chamber to confirm the pistol is clear.
2. Remove the slide from the frame according to the original manufacturer’s instructions.
3. Remove the recoil spring assembly and existing barrel.
4. Apply a light coating of oil to the exterior and barrel hood of the Radian® RAMJET™ barrel.
5. Install the RAMJET™ barrel into the slide and reinstall the recoil spring assembly.
6. Slide the AFTERBURNER™ micro-compensator over the RAMJET™ barrel.
7. Tighten the tapered screw to 15 in.-lb.
8. Reinstall the assembled slide onto the frame.
9. Perform a function test to complete installation.

Cleaning Instructions:

Clean the inside of the RAMJET™ barrel bore as you would any other pistol barrel, using a cleaning patch or bore snake. For anticipated high round counts, apply heat-resistant gun oil to the barrel-to-compensator interface before installing the AFTERBURNER™ to help prevent carbon lock.

If the AFTERBURNER™ becomes carbon locked to the barrel, submerge the AFTERBURNER™ and RAMJET™ in gun oil or CLP overnight, then rotate the compensator to break it free.