Radian AFTERBURNER + RAMJET for Glock 17 Gen 3

Description

Radian AFTERBURNER + RAMJET for Glock 17 Gen 3

The Radian® AFTERBURNER™ + RAMJET™ combo provides unprecedented recoil reduction and match-grade accuracy in a concealed-carry package. The threadless barrel design allows for effortless installation and removal for cleaning.

The AFTERBURNER™ compensator is machined from hardened stainless steel, while the RAMJET™ barrel is constructed from hardened 416R stainless steel. Both components feature a Radianite™ coating that provides low friction, high hardness, and excellent corrosion resistance. This combination delivers exceptional durability and resistance to erosion caused by muzzle blast.

Angled front faces on the AFTERBURNER™ assist with smooth holstering. The INTRA-LOK® mounting system uses the taper-lock principle, with a tapered locking screw that interfaces with an angled V-groove on the underside of the barrel. This design properly times the compensator as it locks onto the upper barrel profile at the muzzle.

INTRA-LOK® allows the user to slide the compensator over the barrel, insert the locking screw, and tighten it for a simple and repeatable installation. The system also allows the barrel to be easily removed from the slide for cleaning.

When installed on a Glock™ G17™, the AFTERBURNER™ + RAMJET™ combo increases the overall slide length by only .47 inches, allowing compatibility with G34® holsters.

Features:

• Provides significant recoil reduction and match-grade accuracy.
• Threadless barrel design allows easy installation and removal.
• AFTERBURNER™ compensator is machined from hardened stainless steel.
• RAMJET™ barrel is machined from hardened 416R stainless steel.
• Radianite™ coating provides low friction, high hardness, and corrosion resistance.
• Angled compensator faces assist with smooth holstering.
• INTRA-LOK® taper-lock mounting system provides secure and repeatable installation.
• Allows the barrel to be removed from the slide for cleaning.
• Engineered specifically for 124-grain and heavier 9mm ammunition.
• Compatible with G34® holsters when installed on a Glock™ G17™.

Specifications:

What’s Included:

• 1 × RAMJET™ ported pistol barrel
• 1 × AFTERBURNER™ micro-compensator
• 1 × INTRA-LOK® tapered screw
• 1 × TORX bit

Installation Instructions:

1. Remove the magazine and visually inspect the chamber to ensure the pistol is unloaded.
2. Remove the slide from the frame according to the original manufacturer’s instructions.
3. Remove the recoil spring assembly and existing barrel.
4. Apply a light coating of oil to the exterior and barrel hood of the Radian® RAMJET™ barrel.
5. Install the RAMJET™ barrel into the slide and reinstall the recoil spring assembly.
6. Slide the AFTERBURNER™ micro-compensator over the RAMJET™ barrel.
7. Tighten the tapered locking screw to 15 in.-lb.
8. Reinstall the assembled slide onto the frame.
9. Perform a function test to complete the installation.