LEE Case Length Gauge & Shell Holder
From $19.95
ASK US A QUESTION
Please send us your inquiry about this product using the below form. The Delta Mike team monitor this inbox periodically throughout the day.
Description
LEE Case Length Gauge & Shell Holder
Lee Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit.
After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. There is no better system to check and trim cases than with the Lee case length gauge and cutter. You don’t need an expensive caliper to set length and never waste even a single case setting up with the cut and try system common to all other fixed length design assures it will never go out of adjustment.
The cutter and lock stud works for all calibers. You will need only one. The case length gauge (pilot) and shell holder must be ordered as a case length gauge and shell holder for each calibre. You can trim cases by hand, use an electric drill or the Lee Zip trim.
Additional information
| Calibre | 223 Remington, 6.5 Creedmoor, 6.5×55 Swedish, 270 Winchester, 7mm-08 Remington, 300 Blackout, 303 British, 7.62×54mmR, 308 Winchester, 50 BMG |
|---|
Brand
Lee Precision
