Eemann Tech CZ Sear Spring Installation Tool
$99.95
In stock
ASK US A QUESTION
Please send us your inquiry about this product using the below form. The Delta Mike team monitor this inbox periodically throughout the day.
Description
Eemann Tech CZ Sear Spring Installation Tool
Eemann Tech sear spring installation tool for CZ 75 pistols and their clones.
The Eemann Tech sear spring tool will revolutionise your sear spring installation.
Either for general maintenance or because your spring broke, on the range or in your workshop, this tool will simplify a normally very tricky job and substantially reduce the time it usually takes.
You can replace or install your sear spring in seconds without any experience. We recommend the installation of the Eemann Tech Competition sear spring part number 131113 or the Eemann Tech extended competition sear spring part number 131114.
The new Eemann Tech sear spring tool incorporates a tiny neodeum magnet which holds the sear spring very securely whilst the short leg of the sear spring rests in a micro hole within the tool.
There are special relief cuts in the tool that allow it to be positioned correctly for the instal.
The tool is made of brass that is softer than the spring thus will not damage it, but it’s hard enough to perform the task.
Compatible with all cz 75 type pistols and their clones:
• CZ 75 pistols
• CZ Shadow 2 pistols
• Tanfoglio pistols
Material: Brass
Brand
Eemann Tech
Disclaimer
Please be aware that some firearm parts may require fitting or adjustment due to variations between individual firearms and normal manufacturing tolerances. If you are not confident in your ability to correctly install or fit a part, we strongly recommend having the work carried out by a qualified gunsmith. The fit, function, and safe operation of all installed parts must be thoroughly checked before live firing. Delta Mike Ltd accepts no responsibility for damage resulting from incorrect installation, fitting, adjustment, or use of these parts.
