A-TEC A-LOCK ADAPTOR

    A-TEC A-LOCK ADAPTOR

    $109.00

    SKU: ATEC-ALOCKADAPT Category:
    Click here for finance options Ask a question about this product

    ASK US A QUESTION

    Please send us your inquiry about this product using the below form. The Delta Mike team monitor this inbox periodically throughout the day.

    Please solve this math problem: 3 + 7 = ?

    Report an error in this listing Request a price match

    REQUEST A PRICE MATCH

    Please send us a URL link to a competitors offer using the below form. The competitors offer must (1) have stock available and (2) be New Zealand based, to be considered. While we can't guarantee we can match every price, we promise to review your request thoroughly and see what we can do to offer you the best possible deal.

    Frequently Bought Together

    +
    +
    A-TEC A-LOCK ADAPTOR
    $109.00
    Hushpower Silencer Neo Cover Camouflage 40x320mm
    Original price was: $19.95.Current price is: $18.95.
    Aimsport Neoprene Suppressor Cover
    Original price was: $44.95.Current price is: $42.70.

    Frequently Bought Together

    A-TEC A-LOCK ADAPTOR
    $109.00
    Original price was: $19.95.Current price is: $18.95.
    Original price was: $44.95.Current price is: $42.70.

    Description

    A-TEC A-LOCK ADAPTER

    Muzzle thread adaptor system for A-Tec Optima and H2 suppressors. It’s a revolution in how you think about attaching your suppressor.

    Features:

    • Adaptor locks on to the muzzle thread of rifle
    • This allows the Optima and H2 suppressor to be quick attached and detached in a second with a forceful 1/4 turn.
    • This allows a single suppressor to be shared amongst multiple rifles all with different threads. In this case the calibre of the suppressor must be equal or greater than the largest calibre rifle.
    • This means the adaptor is on the end of the muzzle, maybe affecting it’s aesthetic if it is a thin barrel.

     

    Instructions:

    • Check that the rifle is unloaded and remove the bolt from the action.
    • Do not do a test run of attaching the adaptor and suppressor as the A-Lock will get stuck inside the suppressor.
    • Degrease(brake clean) the threads on the A-LOCK Mini Adapter and on the barrel.
    • Do a dry run of the adaptor onto the threads:
      • Maximum length of the thread from muzzle to shoulder should be 15mm.
      • Do not tighten at all, it could get stuck.
      • Check there is ZERO protrusion of the muzzle crown or threads past the end of the adaptor. Protrusion will prevent the adaptor locking into the suppressor.
      • Remove.
    • Apply strong and heat resistant thread lock such as Loctite 638 to the muzzle threads on your barrel.Attach and tighten the A-LOCK Mini Adapter to the barrel by hand. Use a rag to get more purchase on the adaptor.
    • Wipe off any excess Loctite adhesive, especially on the A-Lock outer surface and threads. Apply grease on the A-LOCK Mini Adapter.
    • Attach the suppressor, turning it only in the locking direction so that it does not loosen the adaptor.
    • Grasp the suppressor and tighten with moderate torque (6-8 Nm). Do not use extreme force, or the A-LOCK Mini threads may be damaged.
    • Let the adhesive cure for 12-24hrs.
    • After curing, detach and attach the silencer a few times to check the fitting and alignment.

     

     

    **Tighten the silencer firmly by hand onto the A-LOCK Mini Adapter prior to shooting and check regularly and between shots. This is good practice for any suppressor on threads, not just A-Lock.**

    Additional information

    Thread

    1/2-20, 1/2-28, 5/8-24, M14x1, M15x1

    Brand

    A-TEC

    Founded in 1999, A-TEC quickly rose to being one of the most innovative suppressor manufacturers in Europe. A-TEC now manufacturers over 20,000 suppressors a year for the international market.

    Related products